OH+C2H3F的反应机理及产物支化比反应的理论研究

本文对HOC₂H₃F可能解离通道的势能面进行从头算CCSD(T)/CBS//B3LYP/6-311G(d，p)计算，同时对速率常数进行Rice-Ramsperger-Kassel-Marcus计算. 生成主要产物CH₂CHO+HF最有利的反应途径是OHC₂H₃F→i2→TS14→i6→TS9→i3→TS3→CH₂CHO+HF，其中速率决定步骤是HF通过TS11从CO桥接位置解离，能量比反应物高3.8 kcal/mol. 借助中间态TS14，F原子从C_α迁移到C_β位置生成CH₂O+CH₂F，然后通过中间态TS16，H从O迁移到C_α位置；通过中间态TS5，C-C键断裂生成产物，其能量比反应物低1.8 kcal/mol，比TS11低4.0 kcal/mol.     

星载海洋激光雷达最佳工作波长分析

星载激光雷达是实现海洋垂直剖面探测的有效工具,也是目前迫切需求的海洋光学遥感手段。对星载海洋激光雷达的波长参数进行评估对保证探测有效性具有重要意义。本文从探测深度和信噪比两方面分析了星载海洋激光雷达探测全球海洋的最佳波长。利用MODIS 10个波段的水体光学特性数据,估算全球海水探测深度及相应的最优波长;并根据太阳夫琅禾费暗线特性,对信号信噪比进行优化。结果表明:在探测深度方面,最优探测波长在488 nm波段的海洋占全球海洋面积的70%左右,并且全球95%以上的海域在488 nm波段的探测深度优于0.8倍的真光层深度;在信噪比方面,相对于488 nm波段,486.134 nm夫琅禾费暗线处采用0.1 nm带宽的滤光片可以将背景光强度降低70%,相应地回波信噪比整体提升了约5.0%。就全球海洋探测来说,使用486.134 nm作为探测波长可以提高探测深度,有效抑制太阳背景光,提高信噪比,因此,486.134 nm是星载海洋激光雷达的最佳工作波长。     

Stereoselective analysis of flecainide enantiomers using reversed‐phase liquid chromatography for assessing CYP2D6 activity

Stereoselective analyses of flecainide enantiomers were performed using reversed‐phase high‐performance liquid chromatography (HPLC) equipped with a polysaccharide‐based chiral column (Chiralpak AS‐RH) and fluorescence detector. Excitation and emission wavelengths were set at 300 and 370 nm, respectively. Flecainide enantiomers in serum and urine were extracted using diethyl ether. The mobile phase solution, comprising 0.1 m potassium hexafluorophosphate and acetonitrile (65:35, v/v), was pumped at a flow rate of 0.5 mL/min. The recoveries of flecainide enantiomers were greater than 94%, with the coefficients of variation (CVs) <6%. The calibration curves of flecainide enantiomers in serum and urine were linear in the concentration range 5–500 ng/mL and 0.75–15 µg/mL (r > 0.999), respectively. CVs in intra‐day and inter‐day assays were 1.8–5.8 and 3.4–7.5%, respectively. In a pharmacokinetic study, the ratios of (S)‐ to (R)‐flecainide (S/R ratio) in the area under the curve and the amount of flecainide enantiomers excreted in urine were lower in a subject carrying CYP2D6*10/*10 than in subjects carrying CYP2D6*1/*2. The S/R ratio of trough serum flecainide concentration ranged from 0.79 to 1.16 in patients receiving oral flecainide. The present HPLC method can be used to assess hepatic flecainide metabolism in a pharmacokinetic study and therapeutic drug monitoring. Copyright © 2014 John Wiley & Sons, Ltd.     

An even earlier (1717) usage of the expression “golden section”

In a previous article in this journal, Roger Herz-Fischler has pointed out an early usage of the expression “golden section” from 1789. In this note an even earlier usage from 1717 is discussed.     

Refractometer based on a tapered Mach–Zehnder interferometer with Peanut-Shape structure

A novel refractometer based on tapered Mach–Zehnder modal interferometer (MZI) is proposed and experimentally demonstrated. This sensor is composed of a pair of Peanut-Shape structures and an embedded taper – the former excites high-order cladding modes, while the latter enhances the evanescent field. As the effective refractive index (RI) of cladding is based on the changes of surrounding RI, thus extinction ratio will change due to the alteration of the distribution of power in the fiber which is induced by various differences of core and cladding for RI. As a result, the maximum RI sensitivity of 240.78 extinction ratio/RIU (refractive index unit) is achieved within the range from 1.3334 to 1.4081.     

Analysis of the geometrical dependence of auxetic behavior in reentrant structures by finite elements

Materials with a negative Poisson's ratio(PR)are called auxetics;they are characterized by expansion/contraction when tensioned/compressed.Given this counterintuitive behavior,they present very particular characteristics and mechanical behavior.Geometrical models have been developed to justify and artificiall reproduce such materials' auxetic behavior.The focus of this study is the exploration of a reentrant model by analyzing the variation in the PR of reentrant structures as a function of geometrical and base material parameters.It is shown that,even in the presence of protruding ribs,there may not be auxetic behavior,and this depends on the geometry of each reentrant structure.Values determined for these parameters can be helpful as approximate reference data in the design and fabrication of auxetic lattices using reentrant geometries.     

煤与生物质混烧灰荷电特性研究

对玉米秸分别与两种煤以不同比例混烧生成的混烧灰进行了荷电特性研究。利用法拉第杯荷电量检测系统和静电低压撞击器(ELPI)测量了混烧灰的总体荷质比及分级荷质比,并借助于成分分析及形貌分析结果讨论了其影响机理。结果表明,随着生物质掺入量在混烧燃料中的增加,混烧灰的成分组成发生变化,使得其介电常数变大,比电阻增大,表面吸附能力增强,从而使混烧灰的总体荷质比有一定的上升趋势。对混烧灰的分级荷质比测量结果表明,排除灰样粒径的影响,生物质的掺入使得混烧灰的荷电能力得以增强,但影响相对较小,颗粒粒径是影响混烧灰荷电能力的主要因素。     

Effect of external pressure on the Kβ/Kα X-ray intensity ratios of 3d metals

The occupation numbers of the 3d transition metals are calculated as a function of pressure by means of the linear muffin-tin-orbital method. This data is used with the multiconfiguration Dirac-Fock (MCDF) X-ray intensity ratios (R) to estimate the variation of the intensity ratios of 3d metals with pressure. It is found that R decreases with pressure for the early 3d metals whereas it increases for the heavier 3d transition metals.     

Convergence of m-bonacci ‘golden ratios’

This paper proves that the ratios of consecutive terms of the m-bonacci sequence converge to a limit φ_m < 2 and, as m → ∞, these φ_m converge to 2. Further, it is shown that the generating functions for the m-bonacci sequences converge pointwise to the geometric series.     

Analysis of a meshless solver for high Reynolds number flow

In this paper, the extension of an upwind least‐square based meshless solver to high Reynolds number flow is explored, and the properties of the meshless solver are analyzed both theoretically and numerically. Existing works have verified the meshless solver mostly with inviscid flows and low Reynolds number flows, and in this work, we are interested in the behavior of the meshless solver for high Reynolds number flow, especially in the near‐wall region. With both theoretical and numerical analysis, the effects of two parameters on the meshless solver are identified. The first one is the misalignment effect caused by the significantly skewed supporting points, and it is found that the meshless solver still yields accurate prediction. It is a very interesting property and is opposite to the median‐dual control volume based vertex‐centered finite volume method, which is known to give degraded result with stretched triangular/tetrahedral cells in the near‐wall region. The second parameter is the curvature, and according to theoretical analysis, it is found in the region with both large aspect ratio and curvature, and the streamwise residual is less affected; however, the wall‐normal counterpart suffers from accuracy degradation. In this paper, an improved method that uses a meshless solver for the streamwise residual and finite difference for wall‐normal residual is developed. This method is proved to be less sensitive to the curvature and provides improved accuracy. This work presents an understanding of the meshless solver for high Reynolds number flow computation, and the analysis in this paper is verified with a series of numerical experiments. Copyright © 2012 John Wiley & Sons, Ltd.